# DC and IP

**URL:** https://simpeg.discourse.group/c/dcip/7.md

[Latest](https://simpeg.discourse.group/latest.md) · [Categories](https://simpeg.discourse.group/categories.md)

---

## [About the DC and IP category](https://simpeg.discourse.group/t/about-the-dc-and-ip-category/15)

<div class="topic-metadata">

**Author:** [@lheagy](https://simpeg.discourse.group/u/lheagy)\
**Replies:** 0

</div>

This space is for questions about direct current (DC) resistivity and induced polarization (IP) methods.

---

## [Error from multiple receivers per source dipole](https://simpeg.discourse.group/t/error-from-multiple-receivers-per-source-dipole/793)

<div class="topic-metadata">

**Author:** [@UTMZ17N](https://simpeg.discourse.group/u/UTMZ17N)\
**Replies:** 4\
**Last updated:** [March 10, 2026, 10:07pm UTC](https://simpeg.discourse.group/t/error-from-multiple-receivers-per-source-dipole/793 "2026-03-10T22:07:22Z")

</div>

Okay, so.. I’m using the read\_dcip\_xyz() function for a 3D DCIP inversion and run into issues with the number of sources vs receivers generated. The actual survey was completed using a Pole-Dipole array, where the B el…

---

## [Stretched-exponential TDIP inversion](https://simpeg.discourse.group/t/stretched-exponential-tdip-inversion/792)

<div class="topic-metadata">

**Author:** [@a.benavides](https://simpeg.discourse.group/u/a.benavides)\
**Replies:** 0\
**Last updated:** [February 18, 2026, 5:18pm UTC](https://simpeg.discourse.group/t/stretched-exponential-tdip-inversion/792 "2026-02-18T17:18:04Z")

</div>

Hi, I am working on developing a spectral IP (SIP) method to run on SimPEG. I learn that SimPEG can perform stretched-exponential inversion (SEI). There is very little information online about this feature and the closes…

---

## [Discrepencies in Apparent Resistivity on a Uniform Half-Space](https://simpeg.discourse.group/t/discrepencies-in-apparent-resistivity-on-a-uniform-half-space/758)

<div class="topic-metadata">

**Author:** [@kianadmvnd](https://simpeg.discourse.group/u/kianadmvnd)\
**Replies:** 0\
**Last updated:** [February 5, 2026, 5:24pm UTC](https://simpeg.discourse.group/t/discrepencies-in-apparent-resistivity-on-a-uniform-half-space/758 "2026-02-05T17:24:24Z")

</div>

Hi all, I am trying to perform a DC resistivity forward simulation on a uniform half-space with a resistivity of 5000 Ohm.m. I am using a dipole-dipole survey (a=1, n=16). In my results, the calculated apparent resisti…

---

## [Asymmetry in apparent chargeability pseudosection](https://simpeg.discourse.group/t/asymmetry-in-apparent-chargeability-pseudosection/743)

<div class="topic-metadata">

**Author:** [@kianadmvnd](https://simpeg.discourse.group/u/kianadmvnd)\
**Replies:** 3\
**Last updated:** [January 28, 2026, 10:44pm UTC](https://simpeg.discourse.group/t/asymmetry-in-apparent-chargeability-pseudosection/743 "2026-01-28T22:44:12Z")

</div>

Hi everyone, I’m seeing a small asymmetry in apparent chargeability values, even though both the model and acquisition geometry are symmetric. For the same setup, Res2Dmod gives perfectly symmetric results. Example for…

---

## [How to optimize inversion results](https://simpeg.discourse.group/t/how-to-optimize-inversion-results/739)

<div class="topic-metadata">

**Author:** [@lazyn](https://simpeg.discourse.group/u/lazyn)\
**Replies:** 0\
**Last updated:** [November 26, 2025, 9:27am UTC](https://simpeg.discourse.group/t/how-to-optimize-inversion-results/739 "2025-11-26T09:27:39Z")

</div>

Hello, I modified the official example code plot\_inv\_2\_dcip2d.py and used my own data to invert for resistivity and chargeability. The inversion results are not good, showing large areas of very high values. I tried adj…

---

## [Optimization on 3D DC inversion](https://simpeg.discourse.group/t/optimization-on-3d-dc-inversion/722)

<div class="topic-metadata">

**Author:** [@fabioca](https://simpeg.discourse.group/u/fabioca)\
**Replies:** 1\
**Last updated:** [June 5, 2025, 6:18pm UTC](https://simpeg.discourse.group/t/optimization-on-3d-dc-inversion/722 "2025-06-05T18:18:57Z")

</div>

Hello, I am using SimPEG to invert 16 dipole-dipole profiles for 3D structure. I basically work on the tutorial script: 3D Least-Squares Inversion of DC Resistivity Data — SimPEG 0.24.0 documentation My problem is that …

---

## [Possible bug in BaseRx.eval() when using resistivity](https://simpeg.discourse.group/t/possible-bug-in-baserx-eval-when-using-resistivity/571)

<div class="topic-metadata">

**Author:** [@Roland](https://simpeg.discourse.group/u/Roland)\
**Replies:** 4\
**Last updated:** [February 22, 2025, 7:50pm UTC](https://simpeg.discourse.group/t/possible-bug-in-baserx-eval-when-using-resistivity/571 "2025-02-22T19:50:51Z")

</div>

Hi, Using SimPEG 0.21.1 on Ubuntu. I’m trying to write a 3D resistivity inversion script, basing my code off the various tutorials. When I run it, it starts the actual inversion then stops with an error message as belo…

---

## [DC inversion failing](https://simpeg.discourse.group/t/dc-inversion-failing/394)

<div class="topic-metadata">

**Author:** [@fabioca](https://simpeg.discourse.group/u/fabioca)\
**Replies:** 1\
**Last updated:** [March 19, 2024, 3:12am UTC](https://simpeg.discourse.group/t/dc-inversion-failing/394 "2024-03-19T03:12:55Z")

</div>

I am modifying the DC resistivity inversion script (with irls) to use my own data. Even though my data have been acquired with a Wenner-Schlumberger configuration, I was able to create a .obs file. Everything seems to wo…

---

## [2.5D DC/IP simplex grid](https://simpeg.discourse.group/t/2-5d-dc-ip-simplex-grid/558)

<div class="topic-metadata">

**Author:** [@hector](https://simpeg.discourse.group/u/hector)\
**Replies:** 0\
**Last updated:** [March 18, 2024, 5:11pm UTC](https://simpeg.discourse.group/t/2-5d-dc-ip-simplex-grid/558 "2024-03-18T17:11:45Z")

</div>

Hi guys, Do you happen to have a working example of a 2.5 DC/IP inversion with topo using an unstructured triangular mesh? Cheers, Héctor

---

## [Setting inversion DC in SimPEG](https://simpeg.discourse.group/t/setting-inversion-dc-in-simpeg/538)

<div class="topic-metadata">

**Author:** [@eacuellarq](https://simpeg.discourse.group/u/eacuellarq)\
**Replies:** 0\
**Last updated:** [January 3, 2024, 1:19am UTC](https://simpeg.discourse.group/t/setting-inversion-dc-in-simpeg/538 "2024-01-03T01:19:00Z")

</div>

I tried run inversion with this setting but the proj did not decrease, increase. In the example in documentation, I can see that proj decreases with each iteration. So, what do i do in this case? # set up the data misfi…

---

## [How to solve the problem ( splu() got an unexpected keyword argument 'is\_symmetric')](https://simpeg.discourse.group/t/how-to-solve-the-problem-splu-got-an-unexpected-keyword-argument-is-symmetric/430)

<div class="topic-metadata">

**Author:** [@go\_future](https://simpeg.discourse.group/u/go_future)\
**Replies:** 4\
**Last updated:** [April 9, 2023, 6:37am UTC](https://simpeg.discourse.group/t/how-to-solve-the-problem-splu-got-an-unexpected-keyword-argument-is-symmetric/430 "2023-04-09T06:37:43Z")

</div>

TypeError Traceback (most recent call last) Cell In\[19\], line 2 1 halfspace\_resistivity = 100 ----\> 2 dpred = forward\_simulation\_halfspace(mesh, resistivity=halfspace\_resistivity) 3 pl…

---

## [ERT Load can't read Res2Dinv Format](https://simpeg.discourse.group/t/ert-load-cant-read-res2dinv-format/427)

<div class="topic-metadata">

**Author:** [@Habib](https://simpeg.discourse.group/u/Habib)\
**Replies:** 0\
**Last updated:** [April 3, 2023, 5:43am UTC](https://simpeg.discourse.group/t/ert-load-cant-read-res2dinv-format/427 "2023-04-03T05:43:04Z")

</div>

Excuse me Sir, I try to load a resisitivity data use format Res2Dinv. I have 5 Line, and only 1 Line which can be load. Another line always had same issue, that data only read the a b m n data, and rhoa data cannot read. …

---

## [When will the self-potential modeling and inversion module be included in the SIMPEG package?](https://simpeg.discourse.group/t/when-will-the-self-potential-modeling-and-inversion-module-be-included-in-the-simpeg-package/420)

<div class="topic-metadata">

**Author:** [@Zhenlu](https://simpeg.discourse.group/u/Zhenlu)\
**Replies:** 0\
**Last updated:** [March 7, 2023, 8:48am UTC](https://simpeg.discourse.group/t/when-will-the-self-potential-modeling-and-inversion-module-be-included-in-the-simpeg-package/420 "2023-03-07T08:48:40Z")

</div>

We are aiming at foreward modeling and inversing self-potential data. Could you please tell us when will the self-potential module be included in the SIMPEG package? Thanks for your great work.

---

## [DC 3D inversion constrained by GPR data with SimPEG](https://simpeg.discourse.group/t/dc-3d-inversion-constrained-by-gpr-data-with-simpeg/409)

<div class="topic-metadata">

**Author:** [@Changwan](https://simpeg.discourse.group/u/Changwan)\
**Replies:** 0\
**Last updated:** [January 27, 2023, 1:04am UTC](https://simpeg.discourse.group/t/dc-3d-inversion-constrained-by-gpr-data-with-simpeg/409 "2023-01-27T01:04:27Z")

</div>

Dear all, Hi. I really appreciate all of you to create this neat open-source for geophysical analysis. I am a beginner for DC analysis, and my final goal is to do DC 3D inversion constrained by GPR data like this. Is …

---

## [DC-2d inversion with Wenner](https://simpeg.discourse.group/t/dc-2d-inversion-with-wenner/196)

<div class="topic-metadata">

**Author:** [@Yun](https://simpeg.discourse.group/u/Yun)\
**Replies:** 11\
**Last updated:** [September 5, 2022, 4:03pm UTC](https://simpeg.discourse.group/t/dc-2d-inversion-with-wenner/196 "2022-09-05T16:03:55Z")

</div>

Hi, I’m a geophysics graduate student practicing doing DC 2D inversion, I’m trying to use the code example provided on your website https://docs.simpeg.xyz/content/tutorials/05-dcr/plot\_inv\_2\_dcr2d.html to do some SIMPEG…

---

## [Loading .dat file for 2D DC Resistivity Least-Squares Inversio](https://simpeg.discourse.group/t/loading-dat-file-for-2d-dc-resistivity-least-squares-inversio/341)

<div class="topic-metadata">

**Author:** [@linaricoar](https://simpeg.discourse.group/u/linaricoar)\
**Replies:** 1\
**Last updated:** [August 31, 2022, 5:53am UTC](https://simpeg.discourse.group/t/loading-dat-file-for-2d-dc-resistivity-least-squares-inversio/341 "2022-08-31T05:53:35Z")

</div>

Hi, I wanna load the chargeability data of a survey stored in a .dat file to run a DC 2d inversion code, but my survey data is sorted differently from the tutorials and the functions, such as read\_dcip2d\_ubc and read\_dci…

---

## [Python dc Model calculations](https://simpeg.discourse.group/t/python-dc-model-calculations/317)

<div class="topic-metadata">

**Author:** [@peterfen-eng](https://simpeg.discourse.group/u/peterfen-eng)\
**Replies:** 1\
**Last updated:** [June 6, 2022, 7:14pm UTC](https://simpeg.discourse.group/t/python-dc-model-calculations/317 "2022-06-06T19:14:57Z")

</div>

Hello, I would like to ask you, when I am running python, when I write the sentence dpp = simulation.dpred(model), it will show the kernel restart, does anyone know why, thank you very much

---

## [Symmetrical quadrupole device of dc](https://simpeg.discourse.group/t/symmetrical-quadrupole-device-of-dc/331)

<div class="topic-metadata">

**Author:** [@peterfen-eng](https://simpeg.discourse.group/u/peterfen-eng)\
**Replies:** 1\
**Last updated:** [May 28, 2022, 6:10pm UTC](https://simpeg.discourse.group/t/symmetrical-quadrupole-device-of-dc/331 "2022-05-28T18:10:07Z")

</div>

When I was using dipole in dc, I tried to change it to a symmetric quadrupole, which can be measured, but two sets of data are 0 (there are 0 values), I don’t quite understand why, does anyone understand, thanks, the dat…

---

## [Mesh calculation error in DC/IP](https://simpeg.discourse.group/t/mesh-calculation-error-in-dc-ip/328)

<div class="topic-metadata">

**Author:** [@glev](https://simpeg.discourse.group/u/glev)\
**Replies:** 0\
**Last updated:** [May 26, 2022, 12:59am UTC](https://simpeg.discourse.group/t/mesh-calculation-error-in-dc-ip/328 "2022-05-26T00:59:11Z")

</div>

Dear all, when trying to run the DC/IP module on any data, including the examplary FlinFlon\_dcip, the procedure crashes reporting an error when calculating the mesh: quote Setting the mesh extent C:\\Users\\gl\\anaconda…

---

## [DC-2d forward with only 'Dipole-Dipole' or 'pole-dipole' or 'dipole-pole' or 'pole-pole'?](https://simpeg.discourse.group/t/dc-2d-forward-with-only-dipole-dipole-or-pole-dipole-or-dipole-pole-or-pole-pole/250)

<div class="topic-metadata">

**Author:** [@lp081516](https://simpeg.discourse.group/u/lp081516)\
**Replies:** 6\
**Last updated:** [May 15, 2022, 1:01pm UTC](https://simpeg.discourse.group/t/dc-2d-forward-with-only-dipole-dipole-or-pole-dipole-or-dipole-pole-or-pole-pole/250 "2022-05-15T13:01:31Z")

</div>

I found that when I created a survey using simpeg for two-dimensional forward modeling,survey\_type contains just four types of devices(Dipole-Dipole’ or ‘pole-dipole’ or ‘dipole-pole’ or ‘pole-pole’).I was wondering if w…

---

## [Topo with DC-2d-inversion-app](https://simpeg.discourse.group/t/topo-with-dc-2d-inversion-app/183)

<div class="topic-metadata">

**Author:** [@ericjohnson](https://simpeg.discourse.group/u/ericjohnson)\
**Replies:** 5\
**Last updated:** [February 4, 2021, 1:34am UTC](https://simpeg.discourse.group/t/topo-with-dc-2d-inversion-app/183 "2021-02-04T01:34:39Z")

</div>

Hi there, Does anyone have an example of running a 2D resistivity inversion on a dataset with topography? Some example ones that came with DC-2d-inversion-app.ipynb don’t seem to work. It just runs the inversion with to…

---

## [DC demo can not work properly](https://simpeg.discourse.group/t/dc-demo-can-not-work-properly/266)

<div class="topic-metadata">

**Author:** [@zhongmin](https://simpeg.discourse.group/u/zhongmin)\
**Replies:** 0\
**Last updated:** [November 2, 2021, 8:59am UTC](https://simpeg.discourse.group/t/dc-demo-can-not-work-properly/266 "2021-11-02T08:59:04Z")

</div>

Dear contributers: I encountered a problem when I was familiar with the DC module, I note there is a demo from the doc web; it works well when I down download it and just run. When I simplely change the “data\_type” in …

---

## [How to build a 3D Magnetometric resistivity Forward model](https://simpeg.discourse.group/t/how-to-build-a-3d-magnetometric-resistivity-forward-model/227)

<div class="topic-metadata">

**Author:** [@Jump](https://simpeg.discourse.group/u/Jump)\
**Replies:** 2\
**Last updated:** [September 7, 2021, 8:05am UTC](https://simpeg.discourse.group/t/how-to-build-a-3d-magnetometric-resistivity-forward-model/227 "2021-09-07T08:05:05Z")

</div>

How can i use the static/DC model to build a 3D Magnetometric resistivity Forward model. Thanks very much.

---

## [Does Self potential method has been included in the new version?](https://simpeg.discourse.group/t/does-self-potential-method-has-been-included-in-the-new-version/252)

<div class="topic-metadata">

**Author:** [@zhongmin](https://simpeg.discourse.group/u/zhongmin)\
**Replies:** 1\
**Last updated:** [August 30, 2021, 11:25pm UTC](https://simpeg.discourse.group/t/does-self-potential-method-has-been-included-in-the-new-version/252 "2021-08-30T23:25:57Z")

</div>

I konw the SP method is working well in Simpeg 0.13.1 after the simpeg update from 0.14.0 and the self potential disappeared in the DC module, Does the SP

---

## [Creating 2D forward modelling with simpeg saving the outpout plot as matrix or how to save the data of restivity variation wrt x and z axis](https://simpeg.discourse.group/t/creating-2d-forward-modelling-with-simpeg-saving-the-outpout-plot-as-matrix-or-how-to-save-the-data-of-restivity-variation-wrt-x-and-z-axis/211)

<div class="topic-metadata">

**Author:** [@priyamomer](https://simpeg.discourse.group/u/priyamomer)\
**Replies:** 1\
**Last updated:** [April 27, 2021, 4:36pm UTC](https://simpeg.discourse.group/t/creating-2d-forward-modelling-with-simpeg-saving-the-outpout-plot-as-matrix-or-how-to-save-the-data-of-restivity-variation-wrt-x-and-z-axis/211 "2021-04-27T16:36:49Z")

</div>

I want to save the plot of forward model and initial defined model in the matrix of shape N\*M for the purpose of training a CNN using the U-NET Machine learning model can anyone help me regarding this… Also, how can we …

---

## [DC and EM Joint Inversion](https://simpeg.discourse.group/t/dc-and-em-joint-inversion/141)

<div class="topic-metadata">

**Author:** [@GeoPaul](https://simpeg.discourse.group/u/GeoPaul)\
**Replies:** 1\
**Last updated:** [October 15, 2020, 6:44pm UTC](https://simpeg.discourse.group/t/dc-and-em-joint-inversion/141 "2020-10-15T18:44:07Z")

</div>

Hello, I would like to perform 2D plus 3D DC and EM forward modelling and joint inversion. After going through the SimPEG documentation and manuals, I couldn’t figure out the relevant modules and packages use to solve th…
